Mazda 2010 Mazda5 Spezifikationen PDF herunterladen (Seite 307)

Black plate (307,1)

WARNING

Do not replace the xenon fusion bulbs

yourself:

Replacing the xenon fusion bulbs

yourself is dangerous. Because the

xenon fusion bulbs require high

voltage, you could receive an electric

shock if the bulbs are handled

incorrectly. Consult an Authorized

Mazda Dealer when the replacement

is necessary.

Never touch the glass portion of a

halogen bulb with your bare hands and

always wear eye protection when

handling or working around the bulbs:

When a halogen bulb breaks, it is

dangerous. These bulbs contain

pressurized gas. If one is broken, it

will explode and serious injuries

could be caused by the flying glass.

If the glass portion is touched with

bare hands, body oil could cause the

bulb to overheat and explode when

lit.

Always keep halogen bulbs out of the

reach of children:

Playing with a halogen bulb is

dangerous. Serious injuries could be

caused by dropping a halogen bulb

or breaking it some other way.

qReplacing Exterior Light Bulbs

Headlight bulbs

1. Make sure the ignition is switched off

and the headlight switch is off.

2. Lift the hood.

3. Perform the following procedure when

replacing the left headlight bulb. Turn

the screws counterclockwise and

remove them and the cover.

Battery duct

Battery cover

4. Find the high and low beam bulbs in

the rear of the headlight unit.

The outboard bulb is the LOW beam,

and the inboard one is the HIGH beam

(page 8-36).

High-beam bulb

1. Turn the socket and bulb assembly

counterclockwise, and carefully pull it

backward.

2. Disconnect the socket and bulb

assembly from the electrical connector

by pressing the tab on the connector

with your finger and pulling it.

Maintenance and Care

Owner Maintenance

8-37

Mazda5_8AU7-EA-09H_Edition1 Page307

Wednesday, July 8 2009 11:30 AM

Form No.8AU7-EA-09H

1 2 ... 302 303 304 305 306 307 308 309 310 311 312 ... 387 388

Kommentare zu diesen Handbüchern

Keine Kommentare