Mazda 2012 CX-7 Spezifikationen PDF herunterladen (Seite 200)

Black plate (200,1)

The radar sensors do not detect human, animal, or static objects such as fences. In addition, the

system pauses when the selector lever is shifted to the R position. (The system resumes

automatically when the selector lever is shifted from the R position.)

The detectability of the radar sensors has its limitations. The BSM system may not operate

properly under the following conditions:

Ice, snow, or soil adheres to the rear bumper surface around the radar sensors.

During adverse weather conditions such as rain or snow, or under conditions where water is

sprayed.

The rear bumper area around the radar sensors is blocked by foreign material (such as

stickers or a bicycle carrier).

The radar sensors may not detect all types of vehicles around your vehicle, especially the

following types of vehicles:

Motorcycles

Vehicles with body shapes that radar may not reflect such as a flatbed trailer with no cargo.

Vehicles with lower body height such as sports cars.

Have the radar sensors inspected at an Authorized Mazda Dealer if any shock is applied to the

rear bumper, even in a minor accident. If the vehicle is driven with a damaged radar sensor, the

system may not operate properly resulting in an accident.

For repairs or paintwork around the radar sensors, or replacement of the bumper, consult an

Authorized Mazda Dealer.

The radar sensors of the BSM system may be regulated under the radio wave related laws of the

country where the vehicle is driven. The sensors in this system are approved for use in the U.S.A.

(including territories), Canada, and Mexico. If a vehicle with a BSM system is driven in a country

other than the U.S.A., Canada, or Mexico, the system has to be turned off using the BSM OFF

switch.

The detection area of the system has been determined based on the lane width of general

freeways. Therefore on a road with a narrower lane width, the system may detect vehicles on a

lane next to the adjacent lane and operate the warning light/beep. On a road with wider lane

width, the system may not detect vehicles on the adjacent lane and may not operate the warning

light/beep.

Operation of the warning light/beep may be delayed or the system may not operate the warning

light/beep under the following conditions:

The vehicle accelerates from a standing-start with a vehicle alongside.

A vehicle moves from a lane two lanes over to the adjacent lane.

The difference in vehicle speed between your vehicle and another vehicle is larger when

passing or being passed, and the vehicle passes the detection area within a short period of

time.

On a steep incline, or when there is a difference in height between lanes.

Immediately after the system has been activated by pressing the BSM OFF switch again after it

has been turned off (BSM OFF indicator light in instrument panel illuminates) by pressing the

switch.

Although the system may detect objects on the road side such as parked vehicles or guardrails and

operate the warning light/beep, it does not indicate a malfunction.

4-76

When Driving

Blind Spot Monitoring (BSM) System

CX-5_8CA5-EA-11L_Edition3 Page200

Friday, June 22 2012 3:45 PM

Form No.8CA5-EA-11L

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 487 488

Mazda 2012 CX-7 Spezifikationen Seite 200

Kommentare zu diesen Handbüchern

Mazda 2012 CX-7 Spezifikationen Seite 200

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Mazda 2012 CX-7