Mazda 2012 CX-7 Spezifikationen PDF herunterladen (Seite 396)

Black plate (396,1)

3. Install the lug nuts with the beveled

edge inward; tighten them by hand.

WARNING

Do not apply oil or grease to lug nuts

and bolts and do not tighten the lug

nuts beyond the recommended

tightening torque:

Applying oil or grease to lug nuts and

bolts is dangerou s. The lug nuts

could loosen while driving and cause

the tire to come off, resulting in an

accident. In addition, lug nuts and

bolts could be damaged if tightened

more than necessary.

4. Turn the lug wrench counterclockwise

and lower the vehicle. Use the lug

wrench to tighten the nuts in the order

shown.

If you are unsure of how tight the nuts

should be, have them inspected at an

Authorized Mazda Dealer.

Nut tightening torque

N·m (kgf·m, ft·lbf)

108―147

(12―14, 80―108)

WARNING

Always securely and correctly tighten

the lug nuts:

Improperly or loosely tightened lug

nuts are dangerous. The wheel could

wobble or come off. This could result

in loss of vehicle control and cause a

serious accident.

Be sure to reinstall the same nuts you

removed or replace them with metric

nuts of the same configuration:

Because the wheel studs and lug nuts

on your Mazda have metric threads,

using a non-metric nut is dangerous.

On a metric stud, it would not secure

the wheel and would damage the

stud, which could cause the wheel to

slip off and cause an accident.

5. (Aluminum wheel equipped vehicle)

Remove the center cap by tapping it

with the lug wrench.

6. Store the damaged tire, using the tire

hold-down bolt to hold it in place.

Tire hold-down bolt

7-12

If Trouble Arises

Flat Tire

CX-5_8CA5-EA-11L_Edition3 Page396

Friday, June 22 2012 3:48 PM

Form No.8CA5-EA-11L

1 2 ... 391 392 393 394 395 396 397 398 399 400 401 ... 487 488

Kommentare zu diesen Handbüchern

Keine Kommentare