Mazda 2012 CX-7 Spezifikationen PDF herunterladen (Seite 85)

Black plate (85,1)

Front passenger door request switch

To unlock all doors and the liftgate, press

the request switch. A beep sound will be

heard twice and the hazard warning lights

will flash twice.

NOTE

l

The system can be set to unlock all doors by

performing a single operation.

Refer to Personalization Features on page

9-9.

Use the following procedure to change the

setting.

1 Switch the ignition off and close all of the

doors and the liftgate.

2 Open the driver's door.

3 Within 30 seconds of opening the driver's

door, press and hold the UNLOCK button

on the key for 5 seconds or longer.

When you hear the lock/unlock operation

sound for the doors, the system switches to

the new setting. After this, if you want to

continue changing the setting, the system

switches through the sequence of available

settings and sounds the lock/unlock

operation sound each time you press the

UNLOCK button on the transmitter.

4 The setting change is completed by doing

any one of the following:

l

Switch the ignition to ACC or ON.

l

Close the driver's door.

l

Open the liftgate.

l

The key is not operated for 10 seconds.

l

The key LOCK button is pressed.

l

A request switch or the electric liftgate

opener is pressed.

l

Confirm that all doors and the liftgate are

securely locked.

l

All doors and the liftgate cannot be locked

when any door or the liftgate is open.

l

It may require a few seconds for the doors

to unlock after the request switch is

pressed.

l

A beep sound is heard for confirmation

when the doors and the liftgate are locked/

unlocked using the request switch. If you

prefer, the beep sound can be turned off.

The volume of the beep sound can also be

changed.

Refer to Personalization Features on page

9-9.

Use the following procedure to change the

setting.

1 Switch the ignition off and close all of the

doors and the liftgate.

2 Open the driver's door.

3 Within 30 seconds of opening the driver's

door, press and hold the LOCK button on

the key for 5 seconds or longer.

All of the doors and the liftgate lock and the

beep sound activates at the currently set

volume. (If the beep sound is currently set to

not activate, it will not activate.) The setting

changes each time the LOCK button on the

key is pressed and the beep sound activates

at the set volume. (If the beep sound has

been set to not activate, it will not activate.)

4 The setting change is completed by doing

any one of the following:

l

Switch the ignition to ACC or ON.

l

Close the driver's door.

l

Open the liftgate.

l

The key is not operated for 10 seconds.

l

The key UNLOCK button is pressed.

l

A request switch or the electric liftgate

opener is pressed.

l

(With theft-deterrent system)

The hazard warning lights flash when the

theft-deterrent system is armed or turned

off.

Refer to Theft-Deterrent System on page

3-37.

Before Driving

Doors and Locks

3-13

CX-5_8CA5-EA-11L_Edition3 Page85

Friday, June 22 2012 3:45 PM

Form No.8CA5-EA-11L

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 487 488

Kommentare zu diesen Handbüchern

Keine Kommentare