Mazda 13B-MSP Installationshandbuch PDF herunterladen (Seite 14)

4. Assemble the Airinx back together and hand

tight the top screw.

5. Remove the factory Airflow meter off from the

air cleaner box and install the Airflow mete to

the provided air flow meter adapter. Install the

Airinx and the adapter to suction Pipe S-1.

* The O-ring on the Airflow meter will be reused.

Apply some grease on the O-ring on the Airflow

meter, and make sure not to damage when

installing.

(Parts Used #14, 17, 38, 42, 43, 62)

6. Secure the Airinx with the provided bracket and

connect the Airflow meter connector.

(Parts Used #18)

7. Connect the air hose from the Metering Oil

Pump to suction pipe S-1.

(Parts Used #31)

Do not mistake this for the Jet Air Fuel Mixing hose.

8. Connect the Engine by pass hose on the Oil

filler pipe to the suction pipe S-1

(Parts Used #31)

Do not mistake this for the Jet Air Fuel Mixing hose.

3-7 Air Pump and Exhaust Installation

1. Install the provided Air Pump Hose to the factory AIR control valve and install the valve

back to the original location. And route the Air Pump Hose over the turbocharger.

*Use the factory gasket and bolts. (Parts Used #20)

FLOW

Sensor

Attachment

Airflow

Sensor

1 2 ... 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Mazda 13B-MSP Installationshandbuch Seite 14