Mazda 13B-MSP Technical Information PDF herunterladen (Seite 110)

Engines Powertrain

Cylinder Head

• The cylinder head features a bolted on camshaft housing, which comprises an upper and

a lower part. Upper and lower camshaft housing as well as the cylinder head are

matched to each other, i.e. they cannot be replaced separately. If one of the components

exceeds the specification, the cylinder head must be replaced as a complete unit.

• There are no guide sleeves for locating the camshaft housing on the cylinder head. For

this reason, two guide studs (SST) are required for the installation of the camshaft

housing (refer to the workshop manual for details).

• The cylinder head gasket is available in five different thicknesses depending on the

piston protrusion. The gasket is marked respectively (refer to the workshop manual for

details).

• The cylinder head bolts are torque-to-yield bolts, which must be tightened in several

stages (refer to the workshop manual for details).

NOTE: The cylinder head bolts must not be re-used.

L1001.4_01092

1 Engine front side 4 Lower camshaft housing

2 Upper camshaft housing 5 Cylinder head

3 Camshaft

01-100 Curriculum Training

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 141 142

Keine Kommentare

Mazda 13B-MSP Technical Information Seite 110