Powertrain Engines
Valve Train
• The camshafts are driven by a timing belt, which has to be replaced every 160,000 km or
10 years (whichever occurs first). In addition, the valve clearance must be inspected
(and if necessary adjusted) at the same service interval.
•
The procedure for verifying or adjusting the valve timing is the same as on the L-type
engines.
NOTE: In order to prevent damage to the plastic camshaft pulleys when loosening or
tightening the lock bolts, use the pulley holder (SST) with a suitable piece of hose
installed to the SST studs.
L1001.4_01043
1 Timing belt 3 Timing belt tensioner
2 Camshaft pulleys 4 Crankshaft pulley
Curriculum Training 01-43
Kommentare zu diesen Handbüchern