Powertrain Engines
Cylinder Head
• The cylinder head features a bolted on camshaft bearing frame, which can be replaced
separately.
• The cylinder head gasket is available in three different thicknesses depending on the
piston protrusion. The gasket is marked respectively (refer to the workshop manual for
details).
• The cylinder head bolts are torque-to-yield bolts, which must be tightened in several
stages (refer to the workshop manual for details).
NOTE: The cylinder head bolts must not be re-used if their length exceeds the specification
(refer to the workshop manual for details).
L1001.4_01076
1 Camshaft bearing caps 4 Camshaft bearing frame
2 Camshafts 5 Cylinder head
3 Injector sealing ring 6 Engine front side
Curriculum Training 01-81
Kommentare zu diesen Handbüchern