Engines Powertrain
Timing Belt Tensioner
• The WL-C engine features a modified automatic timing belt tensioner with integrated
tensioner pulley. However, the operating principle is the same as on the RF-T engine.
L1001.4_01080
1 Tensioner rod 4 Plunger spring
2 Seal 5 Pressure chamber
3 Plunger 6 Check valve
• For releasing the belt tension the timing belt tensioner has to be turned counterclockwise
with an Allen key, and secured by inserting a locking pin with 6 mm diameter (refer to the
workshop manual for details)..
NOTE: When removing the timing belt tensioner, the tensioner pulley must not be separated
from the tensioner housing.
NOTE: In case air has entered the pressure chamber of the timing belt tensioner, it must be
bled using a certain procedure (refer to the workshop manual for details).
L1001.4_01079
1 Apply force (max. 39 Nm) 3 Hole for locking pin
2 Mounting bolts
01-86 Curriculum Training
Kommentare zu diesen Handbüchern