Powertrain Engines
Accessory Drive Belt
• Three V-drive belts are fitted to drive the engine accessories, i.e. two belts drive the
generator and one belt drives the A/C compressor.
• The drive belt tension can be adjusted via two manual tensioners (refer to the workshop
manual for details).
NOTE: The belt deflection has to be checked when the engine is cold, or at least 30 minutes
after the engine has been switched off.
L1001.4_01083
1 Measuring point 5 Drive belt(s)
2 Locknut 6 Crankshaft pulley
3 Adjusting screw 7 Water pump pulley
4 Generator pulley 8 A/C compressor pulley
Curriculum Training 01-89
Kommentare zu diesen Handbüchern