Mazda 13B-MSP Bedienungsanleitung Seite 16

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 71
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 15
MECHANICAL
01–10–3
01–10
Engine Workshop Manual 13B-MSP (Multi Side Port) (1773–1U–03C)
Revised 6/2008 (Ref. No. R108/08)
3. Install the SSTs (bolt, nut) to the three specified
positions as shown in the figure.
4. Install the SSTs (bolts, nuts, hook, plate) in Step 3
to the SST (arms, bolts) set in Step 2.
5. Adjust the bolt threads by turning them so that
they project approx. 20 mm {0.79 in} from the
plate end.
6. Adjust the bolts and nuts so that the plate and
arms are parallel.
7. Mount the engine to the SST (engine stand).
8. Remove the oil pan drain plug and drain the
engine oil.
9. Replace with a new washer and install the oil pan
drain plug.
Tightening torque
Type A : 29.4—39.2 N·m {3.00—3.99 kgf·m,
21.7—28.9 ft·lbf}
Type B : 29.4—41.2 N·m {3.00—4.20 kgf·m,
21.7—30.3 ft·lbf}
Using 49 J010 3A0A
1. Install the SSTs to the position shown in the
figure.
2. Mount the engine to the SST (engine stand).
3. Remove the oil pan drain plug and drain the
engine oil.
4. Install the oil pan drain plug with a new washer.
Tightening torque
Type A : 29.4—39.2 N·m {3.00—3.99 kgf·m,
21.7—28.9 ft·lbf}
Type B : 29.4—41.2 N·m {3.00—4.20 kgf·m,
21.7—30.3 ft·lbf}
Dismounting
1. Dismount in the reverse order of mounting.
2. Tighten the stud bolt. (Only when using 49 L010 101.)
Tightening torque
14.7—34.3 N·m {1.50—3.49 kgf·m, 10.9—25.2 ft·lbf}
End Of Sie
49 L010 101
49 L010 104
49 L010 105
BHJ0110E003
49 L010 101
49 L010 102
49 L010 105
PARALLEL
APPROX. 20 mm {0.79in}
ENGINE
49 L010 107
99784 0890 OR M8x1.25
LENGTH 90 mm {0.55 in}
BOLT
49 L010 104
49 L010 10449 L010 103
CHU0110E050
AM8×1.25 length 25 mm {1.28 in} bolt
B
99940 1201 (left side engine mount installation nut)
or M12×1.5 nut
C
99756 1230 (left side engine mount installation nut)
+ washer
TT
LL
TT
LL
49 J010 301A
A
B
C
ONLY WHEN USING 49 J010 301A
WHEN USING 49 J010 3A0A
49 J010 301A
49 J010 302A
CHU0110E058
Seitenansicht 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare