Mazda 13B-MSP Bedienungsanleitung PDF herunterladen (Seite 33)

MECHANICAL

01–10–16

3. Inspect the corner seal groove of the rotor by

inserting the SST.

• If 1/2 or more of either end of the SST can be

inserted into the seal groove, replace the

corner seal.

• If 1/2 or more of both ends of the SST can be

inserted into the corner seal groove, replace

the rotor.

Caution

•

••

• Do not push the SST in with force.

•

••

• Keep the SST perpendicular to the seal

groove.

•

••

• When replacing the corner seal, replace

with one that matches the S or L inscription on the rotor.

4. Measure the clearance between the apex seal

groove and the apex seal using a feeler gauge.

• If it exceeds the maximum specification,

replace the apex seal.

• If the clearance is still not within the standard

after replacing the apex seal, replace the

rotor.

Standard clearance

0.042—0.101 mm {0.0017—0.0039 in}

Maximum clearance

0.15 mm {0.0059 in}

End Of Sie

APEX SEAL INSPECTION

CHU011011B10E02

1. Measure the height in the positions shown in the

figure.

• If it is less than the minimum specification,

replace the apex seal.

• Replace the apex seal spring also whenever

replacing the apex seal.

Standard Height

5.3 mm {0.20 in}

Minimum height

4.3 mm {0.17 in}

End Of Sie

49 0839 165

BHJ0110E035

CHU0110E008

BHJ0110E037

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare

Mazda 13B-MSP Bedienungsanleitung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Mazda 13B-MSP