Mazda 13B-MSP Bedienungsanleitung Seite 39

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 71
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 38
MECHANICAL
01–10–22
Engine Workshop Manual 13B-MSP (Multi Side Port) (1773–1U–03C)
Revised 6/2008 (Ref. No. R108/08)
ECCENTRIC SHAFT INSPECTION
CHU011011D01E01
1. Inspect for clogging in the oil passage.
If there is any clogging, remove it with a
needle or similar device and clean with
compressed air.
2. After setting the eccentric shaft main journal on V-
blocks and a surface plate, measure the runout at
the end of the eccentric shaft using a dial gauge.
If it exceeds the maximum specification,
replace the eccentric shaft.
Standard runout
0.02 mm {0.0008 in}
Maximum runout
0.06 mm {0.0024 in}
End Of Sie
ECCENTRIC SHAFT END PLAY INSPECTION
CHU011011D01E02
1. Lock the flywheel (MT) or counterweight (AT)
against rotation using the SST.
2. Assemble the parts in the following order:
(1) Spacer
(2) Needle bearing
(3) Thrust plate
(4) Balance weight
(5) Oil pump drive gear
(6) Metering oil pump drive gear (Type A)
Caution
When assembling the spacer, do not
allow the spacer to be caught in the
needle bearing in the plate.
BHJ0110E050
BHJ0110E051
MT
AT
49 1881 055A
49 F011 101
BHJ0110E007
BHJ0110E052
Seitenansicht 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare