Mazda 13B-MSP Bedienungsanleitung Seite 42

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 71
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 41
MECHANICAL
01–10–25
01–10
Engine Workshop Manual 13B-MSP (Multi Side Port) (1773–1U–03C)
Revised 6/2008 (Ref. No. R108/08)
ECCENTRIC SHAFT BYPASS VALVE
CHU011011D01E04
Warning
Engine oil temperature will increase during the inspection and become very dangerous. Be careful
not to burn yourself during the inspection.
1. Put the eccentric shaft bypass valve in a
container filled with engine oil.
2. Heat the container and verify that the projection
protrudes more than the minimum specification
when the engine oil temperature is 60 °C {140
°F}.
If it is less than the minimum specification,
replace the eccentric shaft bypass valve.
Minimum projection
6 mm {0.24 in}
End Of Sie
ECCENTRIC SHAFT POSITION PLATE INSPECTION
CHU011011D01E05
1. Visually inspect the eccentric shaft position plate
for damage and erosion.
If there is any malfunction, replace the
eccentric shaft position plate.
Eccentric shaft pulley tightening torque
14.2—17.2 N·m {1.45—1.75 kgf·m, 10.5—12.6
ft·lbf}
End Of Sie
MAIN BEARING OIL CLEARANCE INSPECTION
CHU011010E00E01
1. Using a micrometer, measure the outer diameters
of the inside main journal.
2. Using a cylinder bore gauge, measure the inner
diameter of the stationary gear main bearing.
PROJECTION PART
VERNIER CALIPER
CHU0110E057
ECCENTRIC SHAFT
POSITION PLATE
BHJ0110E106
INSIDE
INSIDE
OUTSIDE
OUTSIDE
CHU0110E022
BHJ0110E056
Seitenansicht 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare