Mazda 13B-MSP Bedienungsanleitung Seite 53

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 71
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 52
MECHANICAL
01–10–36
Engine Workshop Manual 13B-MSP (Multi Side Port) (1773–1U–03C)
Revised 6/2008 (Ref. No. R108/08)
2. Assemble the side seal spring in the direction
shown in the figure.
3. Apply petroleum jelly between the side seal and
side seal groove.
4. Assemble the corner seal plug to the corner seal.
Note
When replacing a corner seal with new one,
assemble the corner seal with the painting
surface facing upward.
5. Assemble the corner seal and corner seal spring
with the notch aligned with the apex seal groove.
6. Apply petroleum jelly between the corner seal and
corner seal groove.
7. Place the rotor in the housing.
8. Insert the SST into the apex seal groove of the
rotor and verify that the apex seal groove of the
corner seal is aligned with the apex seal groove of
the rotor.
9. Assemble the side seal and corner seal for the
engine rear side in the same way as the engine
front side.
Oil Jet Plug Assembly Note
1. Apply thread locking compound to the seating face of the oil jet plug.
2. Install the oil jet plug.
Tightening torque
3.9—11.7 N·m
{40—119 kgf·cm, 35—103 in·lbf}
SIDE SEAL
ROTOR
SIDE SEAL SPRING
CHU0110E047
CHU0110E030
CORNER SEAL
CORNER SEAL PLUG
CORNER SEAL SPRING
S:PINK
L:WHITE
CHU0110E051
49 0813 225A
GOOD
NO GOOD
CHU0110E070
Seitenansicht 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 70 71

Kommentare zu diesen Handbüchern

Keine Kommentare