Mazda LF Wartungshandbuch PDF herunterladen (Seite 19)

B–2

ENGINE

ENGINE OVERHAUL SERVICE WARNING

A6E242402000E01

Warning

•

••

•

Continuous exposure with USED engine oil has caused skin cancer in laboratory mice. Protect

your skin by washing with soap and water immediately after this work.

End Of Sie

ENGINE MOUNTING/DISMOUNTING

A6E242402000E02

1. Install the

SSTs

(arms) to the cylinder block holes

as shown, and hand-tighten the bolts

(part No.:

9YA20-1003) or

M10

××

1.5T length 90 mm

{3.55

in}

2. Assemble the

SSTs

(bolts, nuts and plate) to the

specified positions.

3. Adjust the

SSTs

(bolts) so that less than

20 mm

{0.79 in}

of thread is exposed.

4. Make the

SSTs

(arms and plate) parallel by

adjusting the

SSTs

(bolts and nuts).

5. Tighten the

SSTs

(bolts and nuts) to affix the

SSTs

firmly.

Warning

•

••

•

Self-locking brake system of the engine

stand may not be effective when the

engine is held in an unbalanced position.

This could lead to sudden, rapid

movement of the engine and mounting

stand handle and cause serious injury.

Never keep the engine in an unbalanced

position, and always hold the rotating

handle firmly when turning the engine.

6. Mount the engine on the

SST

(engine stand).

7. Drain the engine oil into a container.

8. Clean the flange surface (seal rubber) of the oil pan drain plug, then install the oil pan drain plug.

Tightening torque

20—30 N·m {2.1—3.0 kgf·m, 15—22 ft·lbf}

DISMOUNTING

• Dismount in the reverse order of mounting.

End Of Sie

ENGINE

AME2224E065

AME2224E300

AME2224E301

1731-1E-02C.book 2 ページ２００２年４月２６日金曜日午前１０時３０分

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Mazda LF Wartungshandbuch Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Mazda LF