Mazda LF Wartungshandbuch PDF herunterladen (Seite 34)

ENGINE

B–17

4. Measure the journal diameters in X and Y

directions at the two points (A and B) as indicated

in the figure.

• If not as specified, replace the camshaft.

Standard diameter:

24.96—24.98 mm {0.9827—0.9834 in}

Minimum diameter:

24.95 mm {0.982 in}

5. Remove the tappet.

6. Position plasticgage atop the journals in the axial

direction.

7. IInstall the camshaft cap. (See B–40 Camshaft Assembly Note.)

8. Remove the camshaft cap. (See B–6 Camshaft Cap Disassembly Note.)

9. Measure the oil clearance.

• If not as specified, replace the cylinder head.

Standard clearance:

0.04—0.08 mm {0.002—0.003 in}

Maximum clearance:

0.09 mm {0.0035 in}

10. Install the camshaft cap. (See B–40 Camshaft

Assembly Note)

11. Measure the camshaft end play.

• If not as specified, replace the cylinder head

or camshaft.

Standard end play:

0.09—0.24 mm {0.0035—0.0094 in}

Maximum end play:

0.25 mm {0.0099 in}

12. Remove the camshaft cap. (See B–6 Camshaft

Cap Disassembly Note.)

End Of Sie

AME2224E344

AME2224E307

AME2224E025

1731-1E-02C.book 17 ページ２００２年４月２６日金曜日午前１０時３０分

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 69 70

Keine Kommentare

Mazda LF Wartungshandbuch Seite 34