Mazda LF Spezifikationen Seite 37

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 60
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 36
MECHANICAL
01–10–23
01–10
End Of Sie
VALVE CLEARANCE ADJUSTMENT
E5U011012111E04
1. Remove the engine front cover lower blind plug.
2. Remove the engine front cover upper blind plug.
3. Remove the cylinder block lower blind plug.
4. Install the SST as shown in the figure.
Caution
Removal of this SST is extremely
important. If you crank the engine with
this SST installed, the cylinder block will
be damaged.
5. Turn the crankshaft clockwise so that the
crankshaft is in the No.1 cylinder TDC position.
6. Loosen the timing chain.
(1) Using a suitable screwdriver or equivalent
tool, unlock the chain tensioner ratchet.
(2) Turn the exhaust camshaft clockwise using a
suitable wrench on the cast hexagon and
loosen the timing chain.
(3) Placing the suitable bolt (M6 × 1.0 Length
25—35 mm {0.9—1.3 in}) at the engine front
cover upper blind plug, secure the chain guide
at the position where the tension is released.
UPPER
BLIND
PLUG
LOWER BLIND
PLUG
B3E0110E093
303-507
D3U110ZE4006
3
1
2
BOLT (M6 x 1.0)
B3E0110E096
Seitenansicht 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare