Mazda 6 2002 Spezifikationen PDF herunterladen (Seite 229)

8-15

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

2. Only when the engine is cool, remove

the radiator drain plug and drain the

coolant into a suitable container.

Properly dispose of the used coolant.

3. Flush out the system with running

water.

4. Drain the system completely. Insert

and tighten the plug. Add as much

ethylene-glycol-based coolant and

water as necessary to provide freezing

and corrosion protection.

5. In extremely cold climates, add the

amount recommended in the coolant

manufacturer’s instructions.

6. Run the engine at idle with the cooling

system cap off. Slowly add additional

coolant if necessary.

7. At this point, wait until the engine

reaches normal operating temperature;

then depress the accelerator two or

three times. Add more coolant, if

necessary, until the system is full.

8. Install the cooling system cap. Inspect

all connections for leaks. Inspect the

level in the coolant reservoir one more

time.

▼

Inspecting Brake/Clutch Fluid

Level

The brakes and clutch draw fluid from the

same reservoir.

Inspect the fluid level in the reservoir

regularly. It should be kept at MAX.

The level normally drops with

accumulated distance, a condition

associated with wear of brake and clutch

linings. If it is excessively low, have the

brake/clutch system inspected by an

Authorized Mazda Dealer.

Loosen

Tighten

LoosenTighten

3.0-liter engine

Brake/Clutch Fluid

shuseizumi_J56J_8R29_EA_02I.book Page 15 Wednesday, October 16, 2002 9:51 AM

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 289 290

Mazda 6 2002 Spezifikationen Seite 229

Kommentare zu diesen Handbüchern