Mazda 8T12-EA-03K Bedienungsanleitung PDF herunterladen (Seite 253)

Black plate (253,1)

CAUTION

Don't add engine oil over MAX. This

may cause engine damage.

6. Make sure the O-ring on the dipstick is

positioned properly before reinserting

the dipstick.

qChanging Engine Oil and Filter

Change e ngine oil and filter according to

Scheduled Maintenance (page 8-3).

Please act responsibly—protect the

environment and take used oil to a

recycling facility. Ask your dealer or a

service station for information.

WARNING

Handling Used Engine Oil:

Continuous contact with used engine

oil is dangerous. It could cause skin

cancer. Always wash with soap and

water immediately after changing oil

and filter.

CAUTION

Remove any oil splatter from the

exhaust manifold, the exhaust pipe and

the shield. Oil left on these areas will

smoke when the engine is running.

Changing engine oil

WARNING

Checking or Changing Engine Oil:

Hot engine oil is dangerous. If the

engine has been running, the engine

oil becomes very hot. You could be

seriously burned. Don't check or

change the engine oil when the engine

is hot.

1. Warm up the engine for a few minutes

and turn it off. Remove the oil-filler

cap.

2. Remove the drain plug and drain the

oil into a suitable container.

3. Replace the drain plug washer after the

oil has thoroughly drained.

4. Reinstall the plug tigh tly.

5. Fill the engine with new oil to the

MAX mark on the dipstick.

6. Securely reinstall the oil-filler cap.

2.3-liter engine

Loosen

Tighten

Drain plug

Front

Maintenance and Care

Owner Maintenance

8-11

Mazda6_8T12-EA-03K_Edition1 Page253

Friday, December 5 2003 8:58 AM

Form No.8T12-EA-03K

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 325 326

Kommentare zu diesen Handbüchern

Keine Kommentare