Mazda MAZDA6 Bedienungshandbuch Seite 144

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 302
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 143
5-48
Driving Your Mazda
Switches and Controls
Form No. 8S11-EA-03G
4. After the HomeLink indicator light
changes from a slow to a rapidly
blinking light, release both the
HomeLink and hand-held transmitter
buttons.
5. Press and hold the just-trained
HomeLink button and observe the
indicator light.
If the indicator light
stays on constantly,
programming is complete
and your
device should activate when the
HomeLink button is pressed and released.
If the indicator light blinks
rapidly for
two seconds and then turns to a
constant light, continue with
"Programming" steps 68
to complete
the programming of a rolling code
equipped device (most commonly a
garage door opener).
6. At the garage door opener receiver
(motor-head unit) in the garage, locate
the "learn" or "smart" button. This can
usually be found where the hanging
antenna wire is attached to the motor-
head unit.
7. Firmly press and release the "learn" or
"smart" button. (The name and color of
the button may vary by manufacturer.)
8. Return to the vehicle and firmly
press,
hold for two seconds and release
the
programmed HomeLink button. Repeat
the
"press/hold/release"
sequence a
second time, and, depending on the
brand of the garage door opener (or
other rolling code equipped device),
repeat this sequence a third time to
complete the programming process.
HomeLink should now activate your
rolling code equipped device.
For questions or comments, please contact
HomeLink at www.homelink.com or
1-800-355-3515.
NOTE
If the HomeLink indicator light does
not change to a rapidly blinking light,
contact HomeLink at
www.homelink.com or call 1-800-355-
3515 for assistance.
NOTE
To program the remaining two
HomeLink buttons, begin with
"Programming"
- step 2. Do not
repeat step 1.
NOTE
There are 30 seconds in which to
initiate step 8.
NOTE
To program the remaining two
HomeLink buttons, begin with
"Programming"
- step 2. Do not
repeat step 1.
J56J_8S11-EA-03G_Edition1.book Page 48 Tuesday, June 24, 2003 6:29 PM
Seitenansicht 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 301 302

Kommentare zu diesen Handbüchern

Keine Kommentare