Mazda MAZDA6 Bedienungshandbuch Seite 232

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 302
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 231
8-12
Maintenance and Care
Owner Maintenance
Form No. 8S11-EA-03G
Changing engine oil
1. Warm up the engine for a few minutes
and turn it off. Remove the oil-filler
cap.
2. Remove the drain plug and drain the oil
into a suitable container.
3. Replace the drain plug washer after the
oil has thoroughly drained.
4. Reinstall the plug tightly.
5. Fill the engine with new oil to the
MAX mark on the dipstick.
6. Securely reinstall the oil-filler cap.
7. Start the engine and inspect around the
drain plug for leaks.
8. Turn it off and wait 5 minutes for the
oil to return to the oil pan.
Check the oil level and fill to the MAX
mark if necessary.
Oil capacity (General reference only,
refer to Specifications section for
capacities.)
Changing oil filter
Because you need a special tool to
retighten the filter, an Authorized Mazda
Dealer should do the work.
Checking or Changing Engine Oil:
Hot engine oil is dangerous. If the
engine has been running, the engine
oil becomes very hot. You could be
seriously burned. Dont check or
change the engine oil when the
engine is hot.
WARNING
Front
Loosen
Drain plug
Tighten
2.3-liter engine
NOTE
The indicated engine oil capacities
are for general reference purposes
only. When adding or changing oil,
verify the engine oil level with the
oil dipstick.
Use only specified engine oil (page
10-3).
Tighten
Loosen
Front
Drain plug
3.0-liter engine
J56J_8S11-EA-03G_Edition1.book Page 12 Tuesday, June 24, 2003 6:29 PM
Seitenansicht 231
1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 301 302

Kommentare zu diesen Handbüchern

Keine Kommentare