Mazda MAZDA6 Bedienungshandbuch Seite 235

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 302
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 234
8-15
Maintenance and Care
Owner Maintenance
Form No. 8S11-EA-03G
1. Remove the cooling system cap.
2. Only when the engine is cool, remove
the radiator drain plug and drain the
coolant into a suitable container.
Properly dispose of the used coolant.
3. Flush out the system with running
water.
4. Drain the system completely. Insert
and tighten the plug. Add as much
ethylene-glycol-based coolant and
water as necessary to provide freezing
and corrosion protection.
5. In extremely cold climates, add the
amount recommended in the coolant
manufacturers instructions.
6. Run the engine at idle with the cooling
system cap off. Slowly add additional
coolant if necessary.
7. At this point, wait until the engine
reaches normal operating temperature;
then depress the accelerator two or
three times. Add more coolant, if
necessary, until the system is full.
8. Install the cooling system cap. Inspect
all connections for leaks. Inspect the
level in the coolant reservoir one more
time.
Loosen
Tighten
LoosenTighten
2.3-liter engine
Loosen
Tighten
LoosenTighten
3.0-liter engine
J56J_8S11-EA-03G_Edition1.book Page 15 Tuesday, June 24, 2003 6:29 PM
Seitenansicht 234
1 2 ... 230 231 232 233 234 235 236 237 238 239 240 ... 301 302

Kommentare zu diesen Handbüchern

Keine Kommentare