8-36
Maintenance and Care
Owner Maintenance
Form No. 8S11-EA-03G
Trunk light
1. Press both sides of the lens cap to
remove it.
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse order
of removal.
Your vehicle’s electrical system is
protected by fuses.
If any lights, accessories, or controls don’t
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
▼
Fuse Replacement
If the electrical system doesn’t work, first
inspect fuses on the vehicle’s left side.
1. Turn off the ignition switch and other
switches.
2. Open the fuse panel cover by sliding
the cover straight back toward you.
Fuses
Pulling the cover off sideways may
break the retaining tabs off.
Fuse panel cover
CAUTION
J56J_8S11-EA-03G_Edition1.book Page 36 Tuesday, June 24, 2003 6:29 PM
Kommentare zu diesen Handbüchern