1. Install the hood switch to the hood latch and secure it using a
screw (1 location).
2. Hook the hood switch harness to the hood latch and secure it
using a tie wrap (Black) at one location.
3. Install tie wraps (Black) to the mount bases and temporarily
tighten the hood switch harness at two locations.
4. Peel back the tape backings on the back of the mount bases
and affix the mount bases on the shroud member upper at two
locations with the hood switch harness routed as shown in the
figure.
5. Pass the hood switch harness between the grille bracket and
the shroud member upper.
6. HOOD SWITCH INSTALLATION
Hood switch㩷
Vehicle front
㩷
Hood latch
Screw㩷
x This procedure is not necessary for vehicles with the theft deterrent system because the hood
switch is already installed.
Note
x Do not tighten the tie wrap (Black) so much that the hood
switch harness cannot move.
CAUTION
Shroud member upper㩷
Vehicle front㩷
Hood switch harness㩷
Grille bracket㩷
Mount bases and
Tie wrap (Black)㩷
Hood switch harness㩷
Shroud member upper㩷
Tie wrap (Black)㩷
㩷
Vehicle front㩷
Mount bases and
Tie wrap (Black)㩷
Do no let hood switch
harness contacts bolt.㩷
Bolt㩷
Kommentare zu diesen Handbüchern