REQUIRED TOOLS
ڏScrewdriver (Flathead)ڏScrewdriver (Phillips) ڏSocket wrenchڏFastener removerڏNipper
ڏPliers㩷㩷㩷ڏMasking tape ڏElectrical vinyl tapeڏMat
ڏPrimer (3M Promoter-4298)
ڏIPA (Isopropyl alcohol)
㩷
WARNING
When the negative battery
cable is connected during
operation, it may cause
electric shock or other
personal injuries. Disconnect
the negative battery cable
before removal/installation.
When connecting/dis-
connecting connectors, grasp
the connectors, not the wires.
Otherwise a short, an
accident from poor contact or
fire may occur.
Do not pull the harness with
excessive force. Doing so
can cause a breakage or a
short-related accident, as
well as an electrical short or
fire.
Secure the harness with the
band (part included) so it
doesn’t dangle. If not, it may
cause a short, accident, or
fire.
CAUTION
Using improper tools may
cause damage and or broken
parts. Use the correct tool for
the job.
Wrap protective tape around
screwdrivers and fastener
remover tools to prevent
scratching the vehicle.
Excessive length of tie wrap
may interfere with other parts
and cause damage.
Cut unnecessary part up to
about 5 mm {0.19 in} from
the fixed point.
Put the removed parts and
the parts in the kit on the
protective sheet to prevent
scratches.
Branch connection procedure using electro tap㩷
1. Insert the vehicle wiring harness into the electro tap.
2. Fold the electro tap as shown in the figure and lock it.
㩷
㩷
㩷
3. Insert the harness to the end of the electro tap.
4. Firmly press the electro tap terminal using pliers.
5. Fold the electro tap in the direction of the arrow shown in the
figure and lock it.
2
BEFORE INSTALLATION
x When the negative battery cable is removed, the clock, radio, trip meters and other memories will be erased.
Before performing work, record the content of the memory.
x Refer to the Workshop Manual for removal and installation of vehicle parts.
Not following the procedures for removal/installation in the Workshop Manual could result in an accident or
vehicle malfunction.
Note
x When removing/installing the parts, park the vehicle on level ground and apply the side brake securely. Be
sure to turn the ignition switch off, otherwise the vehicle can move, causing personal injury or vehicle
damage.
WARNING
Electro tap㩷
Firmly press
using pliers㩷
Vehicle wiring harness㩷
Lock
Lock
Vehicle wiring harness㩷
Vehicle wiring harness㩷
x Firmly engage the lock part until a click sound is heard.
CAUTION
3
CONNECTION USING ELECTRO-TAP
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern