Mazda 2005 RX-8 Spezifikationen PDF herunterladen (Seite 124)

Black plate (124,1)

l

When using the following devices in

the vehicle that may cause radio

interference with the receiver unit.

l

A digital device such as a personal

computer.

l

A current converter device such as a

DC-AC converter.

l

When excess snow or ice adheres to

the vehicle, especially around the

wheels.

l

When the tire pressure sensor batteries

are exhausted.

l

When using a wheel with no tire

pressure sensor installed.

l

When using tires with steel wire

reinforcement in the side walls.

l

When using tire chains.

qTires and Wheels

Changing tires and wheels

The foll owing procedure allows the

TPMS to recognize a tire pressure sensor's

unique ID signal code whenever tires or

wheels are changed, such as changing to

and from winter tires.

NOTE

Each tire pressure sensor has a unique

ID signal code. The signal code must be

registered with the TPMS before it can

work. The easiest way to do it is to have

an Authorized Mazda Dealer change

your tire and complete ID signal code

registration.

When having tires changed at an

Authorized Mazda Dealer

Tire pressure sensor ID signal code

registration is completed when an

Authorized Mazda Dealer changes your

vehicle's tires.

When changing tires yourself

If you or someone else changes tires, you

or someone else can also undertake the

steps for the TPMS to complete the ID

signal code registration.

1. After tires have been changed, turn the

ignition switch to the ON position, then

turn it back to the ACC or LOC K

position.

2. Wait for about 15 minutes.

3. After about 15 minutes, drive the

vehicle at a speed of at least 20 km/h

(12 mph) for several minutes and the

tire pressure sensor ID signal code will

be registered automatically.

NOTE

If the vehicle is driven within about 15

minutes of changing tires, the tire

pressure monitoring system warning

light will flash because the sensor ID

signal code would not have been

registered. If this happens, park the

vehicle for about 15 minutes, after

which the sensor ID signal code will

register upon driving the vehicle for

several minutes.

5-28

Driving Your Mazda

Starting and Driving

RX-8_8T69-EA-04G_Edition1 Page124

Wednesday, June 9 2004 2:11 PM

Form No.8T69-EA-04G

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 363 364

Kommentare zu diesen Handbüchern

Keine Kommentare