Mazda 2005 RX-8 Spezifikationen PDF herunterladen (Seite 219)

Black plate (219,1)

NOTE

l

Make sure the jack is well lubricated

before using it.

(With Tire Pressure Monitoring

System)

l

Be sure to register the tire pressure

sensor ID signal code whenever tires

or wheels are changed (page 5-28).

1. Park on a level surface off the right-of-

way and firmly set the parking brake.

2. Put a vehicle with an automatic

transmission in Park (P), a manual

transmission in Reverse (R) or 1, and

turn off the engine .

3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicle

and away from the vehicle and traffic.

5. Remove the jack, and tool (page 7-3).

6. Block the wheel diagonally opposite

the tire to be changed. When blocking

a wheel, place a block both in front and

behind the tire.

NOTE

When blocking a tire, use rocks or

wood blocks of sufficient size to hold

the tire in place.

qRemoving the Tire

1. Loosen the lug nuts by turning them

counterclockwise one turn each, but

don't remove any until the tire has been

raised off the ground.

2. Place the jack under the jacking

position closest to the tire being

changed.

Jacking position

In Case of an Emergency

Flat Tire

7-13

RX-8_8T69-EA-04G_Edition1 Page219

Wednesday, June 9 2004 2:12 PM

Form No.8T69-EA-04G

1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 363 364

Kommentare zu diesen Handbüchern

Keine Kommentare