Mazda 2006 MX-5 Spezifikationen PDF herunterladen (Seite 158)

Black plate (158,1)

l

When a metallic device such as a non-

genuine navigation system is equipped

near the center of the dashboard, which

may block radio signals from the tire

pressure sensor to the receiver unit.

l

When using the following devices in

the vehicle that may cause radio

interference with the receiver unit.

l

A digital device such as a personal

computer.

l

A current converter device such as a

DC-AC converter.

l

When excess snow or ice adheres to

the vehicle, especially around the

wheels.

l

When the tire pressure sensor batteries

are exhausted.

l

When using a wheel with no tire

pressure sensor installed.

l

When using tires with steel wire

reinforcement in the side walls.

l

When using tire chains.

qTires and Wheels

CAUTION

When inspecting or adjusting the tire air

pressures, do not apply excessive force

to the stem part of the wheel unit. The

stem part could be damaged.

Changing tires and wheels

The foll owing procedure allows the

TPMS to recognize a tire pressure sensor's

unique ID signal code whenever tires or

wheels are changed, such as changing to

and from winter tires.

NOTE

Each tire pressure sensor has a unique

ID signal code. The signal code must be

registered with the TPMS before it can

work. The easiest way to do it is to have

an Authorized Mazda Dealer change

your tire and complete ID signal code

registration.

When having tires changed at an

Authorized Mazda Dealer

Tire pressure sensor ID signal code

registration is completed when an

Authorized Mazda Dealer changes your

vehicle's tires.

When changing tires yourself

If you or someone else changes tires, you

or someone else can also undertake the

steps for the TPMS to complete the ID

signal code registration.

1. After tires have been changed, turn the

ignition switch to the ON position, then

turn it back to the ACC or LOC K

position.

2. Wait for about 15 minutes.

3. After about 15 minutes, drive the

vehicle at a speed of at least 25 km/h

(16 mph) for 10 min utes and the tire

pressure sensor ID signal code will be

registered automatically.

5-30

Driving Your Mazda

Starting and Driving

MX-5_8U35-EA-05F_Edition1 Page158

Monday, April 18 2005 4:18 PM

Form No.8U35-EA-05F

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 365 366

Kommentare zu diesen Handbüchern

Keine Kommentare