Mazda 2002 B2300 Spezifikationen PDF herunterladen (Seite 139)

Installing child safety seats in the center front seating position

WARNING: Use the appropriate tether anchor when mounting a

child safety seat in the center seating position. See Child safety

seats with tether straps in this chapter.

1. Lengthen the lap belt. To lengthen the belt, hold the tongue so that

its bottom is perpendicular to the direction of webbing while sliding

the tongue up the webbing.

2. Place the child safety seat in the center seating position.

3. Attach the tether strap on the child seat to the appropriate tether

anchor. See Attaching child safety seats with tether straps in this

chapter.

4. Route the tongue and webbing through the child seat according to

the child seat manufacturer’s instructions.

5. Insert the belt tongue into the proper buckle for the center seating

position until you hear a snap and feel it latch. Make sure the tongue

is securely fastened to the buckle by pulling on tongue.

6. Push down on the child seat with your knee while pulling on the

loose end of the lap belt webbing to tighten the belt. Tighten the

tether strap.

7. Before placing the child into the

child seat, forcibly move the

child seat from side to side and

forward to make sure that the

seat is held securely. If the child

seat moves excessively, repeat

steps 5 through 6, or properly

install the child seat in the

outboard seating position.

WARNING: Do not install a child seat in a center facing jump

seat.

Seating and Safety Restraints

139

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 287 288

Keine Kommentare

Mazda 2002 B2300 Spezifikationen Seite 139