Mazda 2002 B2300 Spezifikationen PDF herunterladen (Seite 162)

1 (First)

Use 1 (First) to provide maximum

engine braking on steep

downgrades. Upshifts can be made

by shifting to 2 (Second) or to

(Overdrive). Selecting 1 (Low) at higher speeds causes the transmission

to shift to a lower gear and will shift to 1 (First) after the vehicle

decelerates to the proper vehicle speed.

Forced Downshifts

To gain acceleration in (Overdrive) or Drive (O/D OFF) when

passing another vehicle, push the accelerator to the floor. The

transmission will downshift to the appropriate gear: fourth, third, second

or first gear.

MANUAL TRANSMISSION OPERATION (IF EQUIPPED)

USING THE CLUTCH

Vehicles equipped with a manual

transmission have a starter interlock

that prevents starting the engine

unless the clutch pedal is fully

depressed.

When starting a vehicle with a

manual transmission:

1. Hold down the brake pedal.

2. Depress the clutch pedal.

3. Put the gearshift lever in N

(Neutral).

4. Start the engine and let it idle for a few seconds.

• Put the gearshift lever in 1 (First) or R (Reverse).

5. Release the clutch slowly while pressing gradually down on the

accelerator pedal.

• Do not drive with your foot resting on the clutch pedal. Do not use

the clutch to hold your vehicle at a standstill while waiting on a hill.

These actions may reduce clutch life.

Driving

162

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 287 288

Keine Kommentare

Mazda 2002 B2300 Spezifikationen Seite 162