Mazda 2002 B2300 Spezifikationen PDF herunterladen (Seite 165)

FOUR-WHEEL DRIVE (4WD) OPERATION (IF EQUIPPED)

WARNING: For important information regarding safe operation

of this type of vehicle, see Preparing to drive your vehicle in

this chapter.

When four–wheel drive (4WD) is engaged, power is supplied to all four

wheels through a transfer case. 4WD can be selected when additional

driving power is desired.

If equipped with the Electronic Shift 4WD System, and 4WD Low

is selected while the vehicle is moving, the 4WD system will not

engage. This is normal and should be no reason for concern.

Before 4WD Low can be engaged, the vehicle must be brought to

a complete stop, the brake pedal depressed and the transmission

placed in neutral (or the clutch pedal depressed on manual

transmissions).

4WD operation is not recommended on dry pavement. Doing so could

result in difficult disengagement of the transfer case, increased tire wear

and decreased fuel economy.

4WD system indicator lights

The 4WD system indicator lights illuminate only under the following

conditions. If these lights illuminate when driving in 2WD, contact your

Mazda dealer as soon as possible.

• 4WD -momentarily illuminates

when the vehicle is started.

Illuminates when 4H (4WD High)

is engaged.

• 4WD LOW –momentarily

illuminates when the vehicle is

started. Illuminates when 4L

(4WD Low) is engaged.

Using the electronic shift 4WD system (if equipped)

Positions of the electronic shift system

2WD (2WD High) – Power to rear axle only.

4X4 HIGH (4WD High) – Power delivered to front and rear axles for

increased traction.

4X4 LOW (4WD Low) – Power to front and rear axles at low speeds.

4WD

LOW

Driving

165

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 287 288

Keine Kommentare

Mazda 2002 B2300 Spezifikationen Seite 165