Mazda CX-9 Bedienungshandbuch PDF herunterladen (Seite 521)

Black plate (521,1)

2. Turn the screws counterclockwise and

remove them.

3. Turn the screws and the center section

of the plastic retainers

counterclockwise and remove them,

then remove the mudguard.

Removal

Installation

4. Disconnect the electrical connector

from the bulb by pressing the tab on

the connector with your finger and

pulling the connector downward.

5. Turn the socket and bulb assembly

counterclockwise and remove it.

Carefully remove the bulb from its

socket in the reflector by gently pulling

it straight backward out of the socket.

6. Install the new bulb in the reverse order

of removal.

NOTE

l

To replace the bulb, contact an Authorized

Mazda Dealer

l

If the halogen bulb is accidentally touched,

it should be cleaned with rubbing alcohol

before being used.

l

Use the protective cover and carton of the

replacement bulb to dispose of the old bulb

promptly out of the reach of children.

Side turn signal lights

í

, Brake lights,

Taillights, High-mount brake light

Due to the complexity and difficulty of

the procedure, the LED bulbs must be

replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible because

it is built into the unit. Replace the unit.

Maintenance and Care

Owner Maintenance

8-43

í

Some models.

CX-9_8CA8-EA-11G_Edition1 Page521

Thursday, June 23 2011 11:6 AM

Form No.8CA8-EA-11G

1 2 ... 516 517 518 519 520 521 522 523 524 525 526 ... 603 604

Kommentare zu diesen Handbüchern

Keine Kommentare