Mazda MAZDA3 4-Door Bedienungshandbuch PDF herunterladen (Seite 186)

100

101

–

When Driving

Switches and Controls

NOTE

Some gate operators and garage door

openers may require you to replace this

Programming Step 2 with procedures

noted in the “Gate Operator/Canadian

Programming” section.

4. After the HomeLink indicator light

changes from a slow to a rapidly

blinking light, release both the

HomeLink and hand-held transmitter

buttons.

NOTE

If the HomeLink indicator light does not

change to a rapidly blinking light, contact

HomeLink at www.homelink.com or call

1-800-355-3515 for assistance.

5. Connect power to the device being

programmed.

6. Firmly press and hold the programmed

HomeLink button for ﬁ ve seconds,

and then release it. Perform this

operation two times to activate the door

or gate. If the door or gate does not

activate, press and hold the just-trained

HomeLink button and observe the

indicator light.

If the indicator light stays on

constantly, programming is complete

and your device should activate when

the HomeLink button is pressed and

released.

NOTE

To program the remaining two HomeLink

buttons, begin with “Programming” —

step 1

If the indicator light blinks rapidly for

two seconds and then turns to a constant

light, continue with “Programming”

steps 7—9 to complete the programming

of a rolling code equipped device (most

commonly a garage door opener).

7. At the garage door opener receiver

(motor-head unit) in the garage, locate

the “learn” or “smart” button. This can

usually be found where the hanging

antenna wire is attached to the motor-

head unit.

8. Firmly press and release the “learn” or

“smart” button. (The name and color of

the button may vary by manufacturer.)

NOTE

Complete the programming within 30

seconds.

9. Return to the vehicle and ﬁ rmly press,

hold for two seconds and release the

programmed HomeLink button. Repeat

the “ press/hold/release ” sequence a

second time, and, depending on the

brand of the garage door opener (or

other rolling code equipped device),

repeat this sequence a third time to

complete the programming process.

HomeLink should now activate your

rolling code equipped device.

NOTE

To program the remaining two HomeLink

buttons, begin with “Programming” —

step 1

For questions or comments, please contact

HomeLink at www.homelink.com or 1-

800-355-3515 .

Mazda3_8DX6-EA-14F_Edition3.indb 60Mazda3_8DX6-EA-14F_Edition3.indb 60 2014/12/02 14:14:472014/12/02 14:14:47

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 591 592

Kommentare zu diesen Handbüchern

Keine Kommentare

Mazda MAZDA3 4-Door Bedienungshandbuch Seite 186

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Mazda MAZDA3 4-Door