Mazda MAZDA6 Bedienungshandbuch PDF herunterladen (Seite 131)

100

101

Black plate (131,1)

2. (Manual transaxle)

Continue to depress the clutch pedal

firmly until the engine has completely

started.

3. Verify that the push button start

indicator light (green) flashes.

NOTE

The push button start indicator light (green)

will flash even if the push button start is

pressed before depressing the brake pedal

(automatic transaxle) or the clutch pedal

(manual transaxle). If the clutch pedal is

depressed (manual transaxle) or the brake

pedal is depressed (automatic transaxle) under

this condition, the engine can be started by

resuming the procedure following this.

4. Touch the push button start using the

backside of the key (as shown) while

the push button start indicator light

(green) flashes.

Push button start

Indicator light

Key

NOTE

When touching the push button start using the

backside of the key as shown in the

illustration, touch the push button start with

the lock switch side of the key facing up.

5. Verify that the push button start

indicator light (green) turns on.

6. Press the push button start to star t the

engine.

NOTE

The engine cannot be started unless the

clutch pedal is fully depressed (manual

transaxle) or the brake pedal is fully

depressed (automatic transaxle).

If there is a malfunction with the push

button start function, the push button start

indicator light (amber) flashes. In this case,

the engine may start, however, have the

vehicle checked at an Authorized Mazda

Dealer as soon as possible.

If the push button start indicator light

(green) does not illuminate, perform the

operation from the beginning again. If it

does not illuminate, have the vehicle

checked at an Authorized Mazda Dealer.

To switch the ignition position without

starting the engine, perform the following

operations after the push button start

indicator light (green) turns on.

1. Release the brake pedal (automatic

transaxle) or the clutch pedal (manual

transaxle).

2. Press the push button start to switch the

ignition position. The ignition switches

in the order of ACC, ON, and off each

time the push button start is pressed. To

switch the ignition position again,

perform the operation from the

beginning.

When Driving

Start/Stop Engine

4-7

Mazda6_8EA2-EA-14K_Edition1 Page131

Thursday, October 16 2014 10:57 AM

Form No.8EA2-EA-14K

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 613 614

Kommentare zu diesen Handbüchern

Keine Kommentare

Mazda MAZDA6 Bedienungshandbuch Seite 131

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Mazda MAZDA6