Mazda MPV Bedienungsanleitung PDF herunterladen

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00

www.cobra.it

Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be

executed as per the instructions given on the product installation manual.

mampv02gbd.doc

MAKE

MAZDA

MOD.

MPV

YEAR

02 →→

PETROL

DIESEL

ALARM/SIREN

POSITION

CENTRAL UNIT POSITION

Position the compact alarms and the sirens on the support of the shock absorber, passenger’s side.

Position the modular sistems and the modules on the left, under the dashboard, driver’s side.

POWER SUPPLY +30: connect to the 3 mm

WHITE/RED wire located in the wiring harness coming out of the 2 way

grey connector, behind the fuse box.

-31: connect with a cable terminal directly to the car body.

IGNITION WIRE +15/54: connect to the 2,5 mm

RED/WHITE wire located in the wiring harness coming out of the white

connector in the lower part of the fuse box.

DIRECTION INDICATORS Connect to the GREEN/WHITE wire and to the GREEN/BLACK wire located in the wiring harness

coming out of the 8 way white connector in the direction indicators operating central placed on the left

of the steering column, under the driver’s side dashboard.

ELECTRIC WINDOWS Positive control signal

Front window, driver’s side:

cut the RED/BLACK wire with SILVER references directly in the wiring harness inside the driver’s

side door.

Front window, passenger’s side:

cut the RED/WHITE wire with SILVER references.

Rear window, driver’s side:

cut the WHITE/GREEN wire with SILVER references.

Rear window, passenger’s side:

cut the RED/YELLOW wire with SILVER references.

CENTRAL DOORS LOCKING Negative control signal

Connect with both the lock and unlock wires to the light GREEN wire located in the wiring harness

coming out of the central locking operating unit placed behind the pssenger’s side glove compartment.

Note: to do the central locking it is necessary to insert a 1Kohm resistance in serie to the locking wire

of the antitheft.

IMMOBILISATION POINT 1 Gasoil pump

Cut the 1,5 mm

BLACK/YELLOW wire located in the wiring harness coming out of the 6 way green

connector placed behind the fuse box.

IMMOBILISATION POINT 2 Central unit locking

Cut the 1,5 mm

ORANGE wire with SILVER references located in the wiring harness coming out of

the connector of the central unit placed under the right footrest, passenger’s side.

STARTER +50: Cut the wire at the position marked ‘+50’ coming out of the connector of the ignition key.

BONNET SWITCH Install an additional switch on the headlamp support plate.

DOORS SWITCH Connect to the YELLOW/RED wire located in the wiring harness coming out of the connector of the

lamp.

BOOT SWITCH The protection of the boot is automatically made connecting to the above mentioned doors wire.

Inhaltsverzeichnis

Seite 1

SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00www.cobra.itNote: This information is not binding, th

Weitere Dokumente für Autos Mazda MPV

Um das Dokument anzuzeigen Mazda MPV Nutzung

Mazda MPV Nutzung (14 Seiten)

Um das Dokument anzuzeigen Mazda MPV Bedienungshandbuch

Mazda MPV Bedienungshandbuch (336 Seiten)

Mazda MPV Nutzung (14 Seiten)

Mazda MPV Bedienungshandbuch (341 Seiten)

Mazda MPV Bedienungshandbuch (10 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Mazda MPV Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Autos Mazda MPV herunter. MAZDA MPV Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Autos Mazda MPV

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Mazda MPV