Mazda 6 2002 Spezifikationen PDF herunterladen (Seite 226)

8-12

Maintenance and Care

Owner Maintenance

Form No. 8R29-EA-02I

Changing engine oil

1. Warm up the engine for a few minutes

and turn it off. Remove the oil-filler

cap.

2. Remove the drain plug and drain the oil

into a suitable container.

3. Replace the plug tightly after the oil

has thoroughly drained.

4. Fill the engine with new oil to the

MAX mark on the dipstick.

5. Securely replace the oil-filler cap.

6. Start the engine and inspect around the

drain plug for leaks.

7. Turn it off and wait 5 minutes for the

oil to return to the oil pan.

Check the oil level and fill to the MAX

mark if necessary.

Oil capacity (General reference only,

refer to Specifications section for

capacities.)

Changing oil filter

Because you need a special tool to

retighten the filter, an Authorized Mazda

Dealer should do the work.

Checking or Changing Engine Oil:

Hot engine oil is dangerous. If the

engine has been running, the engine

oil becomes very hot. You could be

seriously burned. Don’t check or

change the engine oil when the

engine is hot.

WARNING

Front

Loosen

Drain plug

Tighten

2.3-liter engine

Tighten

Loosen

Front

Drain plug

3.0-liter engine

NOTE

•

The indicated engine oil capacities

are for general reference purposes

only. When adding or changing oil,

verify the engine oil level with the

oil dipstick.

•

Use only specified engine oil (page

10-3).

shuseizumi_J56J_8R29_EA_02I.book Page 12 Wednesday, October 16, 2002 9:51 AM

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 289 290

Mazda 6 2002 Spezifikationen Seite 226

Kommentare zu diesen Handbüchern