Mazda 2003 Tribute Spezifikationen PDF herunterladen (Seite 115)

5. To put the retractor in the

automatic locking mode, grasp

the shoulder portion of the belt

and pull downward until all of

the belt is extracted and a click

is heard.

6. Allow the belt to retract. The belt will click as it retracts to indicate

it is in the automatic locking mode.

7. Pull the lap belt portion across

the child seat toward the buckle

and pull up on the shoulder belt

while pushing down with your

knee on the child seat.

8. Allow the safety belt to retract

to remove any slack in the belt.

9. Before placing the child in the

seat, forcibly tilt the seat

forward and back to make sure

the seat is securely held in

place. To check this, grab the

seat at the belt path and

attempt to move it side to side

and forward and back. There

should be no more than one

inch of movement for proper installation.

10. Try to pull the belt out of the retractor to make sure the retractor is

in the automatic locking mode (you should not be able to pull more

belt out). If the retractor is not locked, unbuckle the belt and repeat

steps two through nine.

11. See Attaching child safety seats with tether straps in this chapter.

Seating and Safety Restraints

115

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 247 248

Keine Kommentare

Mazda 2003 Tribute Spezifikationen Seite 115