Mazda 2005 Mazda3 4-Door Spezifikationen PDF herunterladen (Seite 262)

Black plate (262,1)

Also, inspect them for uneven wear and

damage. Abnormal wear is usually caused

by one or a combinati on of the following:

l

Incorrect tire pressure

l

Improper wheel alignment

l

Out-of-balance wheel

l

Severe braking

After rotation, inflate all tire pressures to

specification (page 10-7) and inspect the

lug nuts for tightness.

CAUTION

Rotate unidirectional tires and radial

tires that have an asymmetrical tread

pattern or studs only from front to rear,

not from side to side. Tire performance

will be weakened if rotated from side to

side.

qReplacing a Tire

WARNING

Worn Tires:

Driving with worn tires is dangerous.

Reduced braking, steer ing, and

traction could result in an accident.

Always use tires that are in good

condition.

CAUTION

(With Tire Pressure Mon itoring

System)

When replacing/repairing the tires or

wheels or both, have the work done by

an Aut horized Mazda Dealer, or the tire

pressure sensors may be damaged.

NOTE

(With Tire Pressure Monitoring

System)

l

When tires with steel wire

reinforcement in the sidewalls are

used, the system may not function

correctly even with a genuine wheel.

Refer to System Error Activation on

page 5-23.

l

Be sure to install the tire pressure

sensors whenever tires or wheels are

replaced. Refer to Tires and Wheels

on page 5-23.

If a tire wears evenly, a wear indicator

will appear as a solid band across the

tread.

Replace the tire when this happens.

New tread

Tread wear indicator

Worn tread

8-32

Maintenance and Care

Owner Maintenance

Mazda3_8T97-EC-04J_Edition1 Page262

Saturday, September 25 2004 2:16 PM

Form No.8T97-EC-04J

1 2 ... 257 258 259 260 261 262 263 264 265 266 267 ... 321 322

Kommentare zu diesen Handbüchern

Keine Kommentare