Mazda 2008 Speed 3 Spezifikationen PDF herunterladen (Seite 345)

Black plate (345,1)

3. Install the lug nuts with the beveled

edge inward; tighten them by hand.

WARNING

Do not apply oil or grease to lug nuts

and bolts and do not tighten the lug

nuts beyond the recommended

tightening torque:

Applying oil or grease to lug nuts and

bolts is dangerou s. The lug nuts

could loosen while driving and cause

the tire to come off, resulting in an

accident. In addition, lug nuts and

bolts could be damaged if tightened

more than necessary.

4. Turn the jack handle counterclockwi se

and lower the vehicle. Use the lug

wrench to tighten the nuts in the order

shown.

If you're unsure of how tight the nuts

should be, have them inspected at an

Authorized Mazda Dealer.

Nut tightening torque

N·m (kgf·m, ft·lbf) 88―118 (9―12, 65―87)

WARNING

Always securely and correctly tighten

the lug nuts:

Improperly or loosely tightened lug

nuts are dangerous. The wheel could

wobble or come off. This could result

in loss of vehicle control and cause a

serious accident.

Be sure to reinstall the same nuts you

removed or replace them with metric

nuts of the same configuration:

Because the wheel studs and lug nuts

on your Mazda have metric threads,

using a non-metric nut is dangerous.

On a metric stud, it would not secure

the wheel and would damage the

stud, which could cause the wheel to

slip off and cause an accident.

5. Store the damaged tire, using the tire

hold-down bolt to hold it in place.

(Without sub-w oofer)

Tire clamp

Bolt for flat tire

In Case of an Emergency

Flat Tire

7-13

Mazda3_8AD2-EA-08K_Edition1 Page345

Thursday, October 9 2008 1:7 PM

Form No.8AD2-EA-08K

1 2 ... 340 341 342 343 344 345 346 347 348 349 350 ... 483 484

Kommentare zu diesen Handbüchern

Keine Kommentare