Mazda 2009 MX-5 Miata Spezifikationen PDF herunterladen (Seite 313)

Black plate (313,1)

Changing a Tire

WARNING

Be sure to follow the directions for

changing a tire, and never get under a

vehicle that is supported only by a jack:

Changing a tire is dangerous if not

done properly. The vehicle can slip off

the jack and seriously injure

someone.

Never allow anyone inside a vehicle

supported by a jack:

Allowing someone to remain in a

vehicle supported by a jack is

dangerous. The occupant could cause

the vehicle to fall resulting in serious

injury.

CAUTION

(With Tire Pressure Monitoring

System)

The wheels equipped on your Mazda

are specially designed for installation

of the tire pressure sensors. Do not

use non-genuine wheels, otherwise it

may no t be possible to insta ll the tire

pressure sensors.

NOTE

l

Make sure the jack is well lubricated before

using it.

(With Tire Pressure Monitoring System)

l

Be sure to register the tire pressure sensor

ID signal code whenever tires or wheels are

changed (page 5-33).

1. Park on a level surface off the right-of-

way and firmly set the parking brake.

2. Put a vehicle with an automatic

transmission in Park (P), a manual

transmission in Reverse (R) or 1, and

turn off the engine .

3. Turn on the hazard warning flasher.

4. Have everyone get out of the vehicle

and away from the vehicle and traffic.

5. Remove the jack, and tool (page 7-5).

6. Block the wheel diagon ally opposite

the tire to be changed. When blocking

a wheel, place a tire block both in front

and behind the tire.

NOTE

When blocking a tire, use rocks or wood blocks

of sufficient size if possible to hold the tire in

place.

In Case of an Emergency

Flat Tire

7-13

MX-5_8Z78-EA-08K_Edition1 Page313

Thursday, October 23 2008 1:54 PM

Form No.8Z78-EA-08K

1 2 ... 308 309 310 311 312 313 314 315 316 317 318 ... 443 444

Kommentare zu diesen Handbüchern

Keine Kommentare