Mazda 2009 Tribute HEV Spezifikationen PDF herunterladen (Seite 66)

2. To calibrate, press and hold the

RESET control for

approximately ten seconds until

CAL appears. Release the

control.

3. Slowly drive the vehicle in a circle (less than 3 mph [5 km/h]) until

the CAL display changes to the direction value. It may take up to

five circles to complete calibration.

4. The compass is now calibrated.

AUXILIARY POWER POINT (12V)

Power outlets are designed for accessory plugs only. Do not insert

any other object in the power outlet as this will damage the

outlet and blow the fuse. Do not hang any type of accessory or

accessory bracket from the plug. Improper use of the power

outlet can cause damage not covered by your warranty.

The auxiliary power point is located

in the instrument panel.

A second auxiliary power point is

located on the rear side of the

center console.

Do not use the power point for

operating the cigarette lighter

element (if equipped).

To prevent the fuse from being

blown, do not use the power

point(s) over the vehicle capacity of 12 VDC/180W. If the power point or

cigar lighter socket is not working, a fuse may have blown. Refer to

Fuses and relays in the Roadside Emergencies chapter for information

on checking and replacing fuses.

To have full capacity usage of your power point, the engine is required to

be running to avoid unintentional discharge of the battery. To prevent

the battery from being discharged:

• do not use the power point longer than necessary when the engine is

not running,

2009 Tribute Hybrid (thv)

Owners Guide, 1st Printing

USA (fus)

Driver Controls

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 324 325

Keine Kommentare

Mazda 2009 Tribute HEV Spezifikationen Seite 66