Mazda 2014 MAZDA2 Spezifikationen PDF herunterladen (Seite 248)

Black plate (248,1)

Inspect the antifreeze protection and

coolant level in the coolant reservoir at

least once a year―at the beginning of the

winter season―and before traveling

where temperatures may drop below

freezing.

Inspect the condition and connections of

all cooli ng system and heater hoses.

Replace any that are swollen or

deteriorated.

The coolant should be at full in the

radiator and betwe en the FULL and LOW

marks on the coolant reservoir when the

engine is cool.

Cooling fan

If it is at or near LOW, add enough

coolant to the coolant reservoir to provide

freezing and corrosion protection and to

bring the level to FULL.

Securely tighten the coolant reservoir tank

cap after adding coolant.

CAUTION

Ø Radiator coolant will damage

paint.

Rinse it off quickly if spilled.

Ø Use only soft (demineralized)

water in the coolant mixture.

Water that contains minerals will

cut down on the coolant's

effectiveness.

Ø Do not add only water. Always

add a proper coolant mixture.

Ø The engine has aluminum parts

and must be protected by an

ethylene-glycol-based coolant to

prevent corrosion and freezing.

Ø DO NOT USE coolants Containing

Alcohol, methanol, Borate or

Silicate.

These coolants could damag e the

cooling system.

Ø DO NOT MIX alcohol or methanol

with the coolant. This could

damage the cooling system.

Ø Do not use a solution that

contains more than 60%

antifreeze.

This would reduce effectiveness.

8-14

Maintenance and Care

Owner Maintenance

Mazda2_8CC7-EA-11H_Edition1 Page248

Tuesday, July 12 2011 2:8 PM

Form No.8CC7-EA-11H

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 343 344

Kommentare zu diesen Handbüchern

Keine Kommentare