Mazda MAZDA3 4-Door Bedienungshandbuch PDF herunterladen (Seite 139)

5-24

Driving Your Mazda

Starting and Driving

Form No. 8S18-EA-03I

Warning light flashes

When the warning light flashes, there may

be a system malfunction. Consult an

Authorized Mazda Dealer.

▼

System Error Activation

When the warning light flashes, there may

be a system malfunction. Consult an

Authorized Mazda Dealer.

A system error activation may occur in the

following cases:

•

When there is equipment or a device

near the vehicle using the same radio

frequency as that of the tire pressure

sensors.

•

When a large metallic object (e.g. a

large electric household appliance or a

desk-top computer) is placed on the

right side of the rear seat, which may

block radio signals from the tire

pressure sensor to the receiver unit.

•

When using the following devices in

the vehicle that may cause radio

interference with the receiver unit.

• A digital device such as a personal

computer.

• A current converter device such as a

DC-AC converter.

•

When excess snow or ice adheres to the

vehicle, especially around the wheels.

•

When the tire pressure sensor batteries

are exhausted.

•

When using a wheel with no tire

pressure sensor installed.

•

When using tires with steel wire

reinforcement in the side walls.

•

When using tire chains

▼

Tires and Wheels

Changing tires and wheels

The following procedure allows the

TPMS to recognize a tire pressure

sensor’s unique ID signal code whenever

tires or wheels are changed, such as

changing to and from winter tires.

When having tires changed at an

Authorized Mazda Dealer

Tire pressure sensor ID signal code

registration is completed when an

Authorized Mazda Dealer changes your

vehicle’s tires.

When changing tires yourself

If you or someone else changes tires, you

or someone else can also undertake the

steps for the TPMS to complete the ID

signal code registration.

1. After tires have been changed, turn the

ignition switch to the ON position, then

turn it back to the ACC or LOCK

position.

NOTE

A tire pressure sensor is not installed

to the temporary spare tire. The

warning light will flash continuously

while the temporary spare tire is being

used.

NOTE

Each tire pressure sensor has a unique

ID signal code. The signal code must

be registered with the TPMS before it

can work. The easiest way to do it is to

have an Authorized Mazda Dealer

change your tire and complete ID

signal code registration.

J48C_8S18-EA-03I_Edition1.book Page 24 Wednesday, August 6, 2003 8:51 AM

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 374 375

Kommentare zu diesen Handbüchern

Keine Kommentare