Mazda MAZDA3 4-Door Bedienungshandbuch PDF herunterladen (Seite 190)

4

–

64

When Driving

Tire Pressure Monitoring System

Tire Pressure Monitoring System

Initialization

In the following cases, system

initialization must be performed so that the

system operates normally.

y

A tire pressure is adjusted.

y

Tire rotation is performed.

y

A tire or wheel is replaced.

y

The battery is replaced or completely

drained.

y

The tire pressure monitoring system

warning light is illuminated.

Initialization method

1. Park the car in a safe place and ﬁ rmly

apply the parking brake.

2. Let the tires cool, then adjust the tire

pressure of all four (4) tires to the

speciﬁ ed pressure indicated on the tire

pressure label located on the door jamb

of the driver's door (door open).

Refer to Tires on page 9-9 .

3. Switch the ignition ON.

4. While the vehicle is parked, press

and hold the tire pressure monitoring

system set switch and verify that

the tire pressure monitoring system

warning light in the instrument cluster

ﬂ ashes twice and a beep sound is heard

once.

CAUTION

If the system initialization is performed

without adjusting the tire pressure,

the system cannot detect the normal

tire pressure and it may not illuminate

the tire pressure monitoring system

warning light even if a tire pressure is

low, or it may illuminate the light even

if the pressures are normal.

The system initialization will not be

performed if the switch is pressed while

the vehicle is being driven.

Mazda3_8DC9-EA-14A_Edition1.indb 64 2013/10/18 14:56:01

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 523 524

Kommentare zu diesen Handbüchern

Keine Kommentare