Mazda MAZDA6 Bedienungshandbuch PDF herunterladen (Seite 396)

1. Make sure the booster battery is 12 V

and that its negative terminal is

grounded.

2. If the booster battery is in another

vehicle, don't allow both vehicles to

touch. Turn off the engine of the

vehicle with the booster battery and all

unnecessary electri cal loads in both

vehicles.

3. Connect the jumper cables in the exact

sequence as in the illustration.

l

Connect one end of a cable to the

positive terminal on the discharged

battery (1).

l

Attach the other end to the positive

terminal on the booster battery (2).

l

Connect one end of the other cable

to the negative terminal of the

booster battery (3).

l

Connect the other end to the ground

point indicated in the illustration

away from the discharged battery

(4).

4. Start the engine of the booster vehicle

and run it a few minutes. Then start the

engine of the other vehicle.

5. When finished, carefully disconnect the

cables in the reverse order described in

the illustration.

Push-Starting

Do not push-start your Mazda.

WARNING

Never tow a vehicle to start it:

Towing a vehicle to start it is

dangerous. The vehicle being towed

could surge forward when its engine

starts, causing the two vehicles to

collide. The occupants could be

injured.

CAUTION

Do not push-start a vehicle that has

a manual transaxle. It can damage

the emission control system.

NOTE

You can't start a vehicle with an automatic

transaxle by pushing it.

7-16

In Case of an Emergency

Emergency Starting

Mazda6_8AS3-EA-09E_Edition1 Page396

Wednesday, May 13 2009 2:26 PM

Form No.8AS3-EA-09E

1 2 ... 391 392 393 394 395 396 397 398 399 400 401 ... 517 518

Kommentare zu diesen Handbüchern

Keine Kommentare