Mazda MAZDA6 Bedienungshandbuch PDF herunterladen (Seite 442)

3. Disconnect the electrical connector

from the bulb by pressing the tab on

the connector with your finger and

pulling the connector downward.

4. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb

from its socket in the reflector by

gently pulling it straight backward out

of the socket.

5. Install the new bulb in the reverse order

of removal.

NOTE

l

To replace the bulb, contact an Authorized

Mazda Dealer.

l

If the halogen bulb is accidentally touched,

it should be cleaned with rubbing alcohol

before being used.

l

Use the protective cover and carton for the

replacement bulb to dispose of the old bulb

promptly and out of the reach of children.

Front side marker lights

1. If you are changing the right side-

maker light, start the engine, turn the

steering wheel all the way to the right,

and turn off the engine. If you are

changing the left side-maker light, turn

the steering wheel to the left.

2. Make sure the ignition is switched off,

and the headlight switch is off.

3. Turn the screws and the center section

of the plastic retainers

counterclockwise and remove them,

then partially peel back the mudguard.

Removal

Installation

8-42

Maintenance and Care

Owner Maintenance

Mazda6_8BG6-EA-10H_Edition2 Page442

Friday, October 15 2010 5:36 PM

Form No.8BG6-EA-10H

1 2 ... 437 438 439 440 441 442 443 444 445 446 447 ... 521 522

Kommentare zu diesen Handbüchern

Keine Kommentare