Mazda MX-5 Bedienungshandbuch PDF herunterladen (Seite 373)

Black plate (373,1)

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse order

of the removal procedure.

Front turn signal lights/Parking lights

1. If you are changing the right bulb, start

the engine, turn the steering wheel all

the way to the right, and turn off

engine. If you are changing the left

bulb, turn the steering wheel to the left,

and turn off engine.

2. Make sure the turn signal switch is off.

3. Turn the center section of the plastic

retainer counterclockwise and remove

the retainers and partially peel back the

mudguard.

Removal

Installation

4. Turn the socket and bulb assembly

counterclockwise and remove it.

5. Disconnect the bulb from the socket.

6. Install the new bulb in the reverse order

of the removal procedure.

Rear turn signal lights, Reverse lights,

Brake lights/Taillights, Rear side

marker lights

Rear side marker lights

Due to the complexity and difficulty of

the procedure, the LED bulbs must be

replaced by an Authorized Mazda Dealer.

NOTE

LED bulb replacement is not possible because

it is built into the unit. Replace the unit.

Rear turn signal lights, Reverse lights,

Brake lights/Taillights

1. Make sure the igni tion is switched off

and the applicable light switch is off.

2. Lift the trunk.

Maintenance and Care

Owner Maintenance

8-43

MX-5_8DG6-EA-13F_Edition1 Page373

Thursday, May 30 2013 10:52 AM

Form No.8DG6-EA-13F

1 2 ... 368 369 370 371 372 373 374 375 376 377 378 ... 451 452

Kommentare zu diesen Handbüchern

Keine Kommentare