Mazda MX-5 Bedienungshandbuch PDF herunterladen (Seite 121)

Black plate (121,1)

NOTE

l

The gear units on both sides have to be

unlocked to release the deck before it is

raised manually. Because the deck is heavy,

two adults are required to raise it.

l

The following describes the procedure for

the gear unit on one side. Perform the

procedure on both sides.

2. Insert the Allen wrench into the Allen

socket in the bolt head that is pointed

forward of the gear unit located under

the deck lid as shown in the figure.

Deck

Bolt

Gear unit

Allen wrench

NOTE

The gear units are located underneath the

deck.

Bolt

3. Use the eyebolt to get enough torque

on the short leg of the Allen wrench

and turn the Allen wrench 4 times

counterclockwise.

Allen wrench

Eyebolt

4. Disconnect the eyebolt from the Allen

wrench leaving the Allen wrench in

place, and insert the threaded end of

the eyebolt in the hole directly above

the Allen socket and tighten it

clockwise two full turns.

Eyebolt

Bolt

Thread hole

NOTE

Tighten the eyebolt with the Allen wrench

inserted. The Allen wrench can serve as a

reference for inserting the eyebolt more easily.

5. Remove the bolt, which is loosened

using the Allen wrench, by turning it

counterclockwise.

Knowing Your Mazda

Doors and Locks

3-57

MX-5_8CC1-EA-11F_Edition2 Page121

Monday, July 18 2011 10:8 AM

Form No.8CC1-EA-11F

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 455 456

Kommentare zu diesen Handbüchern

Keine Kommentare