Mazda MX-5 Bedienungsanleitung PDF herunterladen (Seite 327)

Black plate (326,1)

WARNING

Do not replace the xenon fusion bulbs

yourself:

Replacing the xenon fusion bulbs

yourself is dangerous. Because the

xenon fusio n bulbs require high

voltage, you could receive an electric

shock if the bulbs are handled

incorrectly. Consult an Authorized

Mazda Dealer when the replacement is

necessary.

Never touch the glass portion of a

halogen bulb with your bare hands

and always wear eye protection when

handling or working around the

bulbs:

When a halogen bulb breaks, it is

dangerous. These bulbs contain

pressurized gas. If one is broken, it

will explode and serious injuries could

be caused by the flying glass.

If the glass portion is touched with

bare hands, body oil co uld cause the

bulb to overheat and explode when lit.

Always keep halogen bulbs out of the

reach of children:

Playing with a halogen bulb is

dangerous. Serious injuries could be

caused by dropping a halogen bulb or

breaking it some other way.

qReplacing Exterior Light Bulbs

Replacing the headlight bulbs

1. Make sure the headlight switch is off.

2. Lift the hood and find the high and low

beam bulbs in the rear of the headlight

body.

The outboard bulb is the LOW beam,

and the inboard one is the HIGH beam.

High-beam bulbs

1. Disconnect the electrical connector

from the bulb by pressing the tab on

the connector with your finger and

pulling the connector downward.

2. Turn the socket and bulb assembly to

remove it. Carefully remove the bulb

from its socket in the reflector by

gently pulling it straight backward out

of the socket.

3. Install the new socket and bulb

assembly in the reverse order of

removal.

8-40

Maintenance and Care

Owner Maintenance

MX-5_8V80-EA-06F_Edition1 Page326

Monday, June 12 2006 12:58 AM

Form No.8V80-EA-06F

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 406 407

Kommentare zu diesen Handbüchern

Keine Kommentare